Cannot connect due to adb conflict issue

[Puppy]

Cannot connect due to adb conflict issue

Views : 31935 Replies : 21 Likes : 3 #1

Hello,

I cannot connect my Android to your program. I was told that the problem was resulted by the adb conflict. But I don’t know to solve the problem. Could you help me? Thank you very much!

Reply

[Ada Reed]

#2

Hi Taylor,

Sorry for the problem. Yes, if there is adb conflict of our program and other programs, it will cause the connection failure. You will see that either our program’s adb procedure is not working, or it constantly restarts and flashes. To check and solve the problem, please follow the instruction below. Before that, please make sure our program is running.

1. Press “Windows Logo Key” and “R” simultaneously on the keyboard.

   

2. The “Run” window will appear, type in “cmd” and press “OK”.

   

3. After a new window opens, copy and paste the command into it: netstat -ano|findstr 5037, and press Enter to operate.

   

4. Wait for the process to finish. Then scroll up and find all the lines with “LISTENING”. Remeber all the numbers at the end of them.

   

5. Open Task Manager, go to “Details”. Under the row of “PID”, find the exact numbers. In the front of the numbers, you can see all the procedures which are using the adb.

   

6. Only when our procedure “ApowersoftAndroidDaemon.exe” is the only one that is using the adb can you connect your phone successfully. If there are other procedures using the adb at the same time, it will result in the adb conflict. Therefore, you need to close the other procedures occupying the adb and only keep our procedure “ApowersoftAndroidDaemon.exe”. If our procedure is not running, please restart our program.

   

7. If other procedure will restart by itself after you close it, please right click it and choose “Open file location”. Check which program it belongs and then uninstall that program.

   

Once it’s done, please restart our program and connect again. Thank you!

Reply

[ring568925]

#3

This is what i get, “failed to connect”

Reply

• 
  • Ada Reed :

    Dear user,

    
    

    Sorry for the inconvenience. Would you please follow the guide here to check on the possible problems and solutions: https://www.apowersoft.com/community/topic/solutions-to-android-cannot-connect-to-apowermirror-via-usb.html? 

  • 2019-02-15 01:54 Reply
• 
  • Md Sadman :

    Just end task of adb.exe then reconnect

  • 2019-11-01 23:59 Reply

[evanscene_blackwood]

#4

Hello!
I just ran into the “Failed to connect” issue.
I followed your guide and ended up installing the Drivethelife application on my desktop and updated all the drivers.
After this, I restarted my computer and restarted the Apowermirror application.
I then attempted to connect using USB, and everything seemed to be normal.
This time around it told me to turn on the USB debugger option, which was already enabled so I thought it was odd.
I assumed I had to re-enable the USB debugger option and did so, as well as reconnecting my phone to my computer.
But now I’m stuck on my first issue.
“Failed to connect”.
What now???

Reply

• 
  • Ada Reed :

    Hi,

    Sorry for the inconvenience. Could you please tell me the brand and system of your phone?

  • 2019-04-10 02:26 Reply
• 
  • stratoyan reply to Ada Reed :

    Vivo V11 pro

  • 2019-09-20 10:48 Reply
• 
  • rinkuviswas reply to stratoyan :

    i have same problem..what should i do

    
    

  • 2019-10-14 03:58 Reply
• 
  • rarepedro :

    ..............

    
    

    
    

  • 2020-01-27 21:42 Reply

[Khaledaldhabaan]

#5

Hi I’m facing the same problem I have mate 20 and I can’t control my phone with the mouse. It’s run until 27% then fail.

Reply

• 
  • Ada Reed :

    Hi, Sorry for the inconvenience. Could you please send the feedback from desktop program? Our technician will check the issue for you. Thank you very much.

  • 2019-04-15 01:31 Reply
• 
  • mrfour74 :

    same problem it's run until 27% then failed

  • 2019-11-05 14:28 Reply

[michailfink1]

#6

fail to connect per usb

Hi,

the way with cmd and taskmgr doesn´t  working by me

what i can do now?

Reply

[michailfink1]

#7

I NEED HELP

Reply

• 
  • Ada Reed :

    Dear user,

    
    

    Sorry for the inconvenience. Would you please follow the guide here to check on the possible problems and solutions: https://www.apowersoft.com/community/topic/solutions-to-android-cannot-connect-to-apowermirror-via-usb.html? 

    
    

    If it doesn't help, please let us know. Thank you!  

  • 2019-04-15 20:29 Reply

[luis_hap]

#8

I have an S9+, after trying everything recommended by yoy troubleshooting guide I still can not connect via USB, it goes all the way to 13% and then I get the error message. I see too many people having the same issue with no solution…

Reply

[poterville]

#9

Does ApowerMirror support connecting two Android phones via USB cable simultaneously?  I can only connect one phone via USB at a time.

Reply

• 
  • Sunny Alex :

    Hi,

    
    

    Yes. After you purchase the VIP, you can mirror 3 devices at the same time.

  • 2019-04-21 22:10 Reply

[t.bonk]

#10

same problem … no connection via usb with huawei p20 lite … please gimme a hint how to solve the problem. usb debugging was turned off

Reply

• 
  • Sunny Alex :

    Dear user,

     

    Sorry for the inconvenience. Would you please follow the guide here to check on the possible problems and solutions:https://www.apowersoft.com/community/topic/solutions-to-android-cannot-connect-to-apowermirror-via-usb.html? Thank you.

  • 11 months ago Reply

[Nurlan Əsədov]

#11

Cannot connect due to adb conflict issue

Samsung Galaxy j2 prime

Reply

• 
  • Sunny Alex :

    Hi, Sorry for the inconvenience. Could you please send the feedback from desktop program? Our technician will check the issue for you. Thank you very much.

  • 2019-08-19 21:23 Reply

[big]

#12

hi

having the same issue as everyone else. is there a fix for this?

Reply

[Luka Košir]

#13

hi! My screen on my phone is broke so i cant conect my phone to my pc. what can i do pleas help.

Reply

• 
  • Sunny Alex :

    Hi, you need to enable the USB debugging first. Thank you.

  • 2019-12-12 22:22 Reply